Project Performance Research Paper

Project Performance
Project Performance

Project Performance

Order Instructions:

APA Styles, double spacing.

Project Performance

Monitoring and controlling a project including preparing project performance reports, are some of the most important tasks a project manager will perform. The requirements for performance reporting will be determined by the stakeholders and should be documented in the project plan. Earned value analysis is one technique for determining how a project is performing. The results of earned value analysis are key inputs to stakeholder reporting which, in turn, are used to make decisions about the project.

Scenario for the Discussion

Refer to question #27 on page 266 of the Mantel text.

After considering the scenario, post by Day 3 your response to the following questions:

•What is your assessment of the performance of the project?
•What metrics did you use to come to your conclusion about the performance of the project?
•What do you think should be communicated to the stakeholders? Why?

SAMPLE ANSWER

  1. The following project is at the end of its sixth week. Find the cost and schedule variances. Also find the CPI and SPI. Then find the critical ratio of the project using earned value calculations. Finally, calculate the ETC and EAC for the project

Activity           Predecessors  Duration (wks)          Budget ($)      Actual Cost ($) %Complete

a —                 ———–                     2                      300                             400                  100

b                      —                                3                      200                              180                  100

c                      a                                  2                      250                              300                  100

d                      a                                 5                      600                              400                  20

e                      b, c                              4                      400                              200                  20

 

The Cost Variance (CV) is arrived at by finding the difference between the Earned Value (EV) and the Actual Cost (AC).  The Earned Value (EV) is a sum of the Actual Completion (AC) (in percentage) and the Budget at Completion (BAC) (Bible, Bivins & Susan, 2011)

Activity‘d’ CV = EV – AC; Therefore EV = Actual Completion (%) X BAC

= 20% X 400

= 80

Activity‘d’ CV = 80 – 400

= -320

Activity‘e’ CV = EV – AC; Therefore EV = Actual Completion (%) X BAC

= 20% X 200

= 40

Activity‘e’ CV = 40 – 200

= -160

The Scheduled Variance (SV) is calculated by getting the difference between the Expected Value and the Planned Value (PV).  On its part the PV is a sum of the Planned Completion (in percentage) and the BAC (Bible, Bivins & Susan, 2011)

Activity‘d’ SV = EV – PV; Therefore PV = Planned Completion (%) X BAC

= 20% X 600

= 120

Activity‘d’ SV = 120 – 600

= -480

Activity‘e’ SV = EV – PV; Therefore PV = Planned Completion (%) X BAC

= 20% X 400

= 80

Activity‘e’ SV = 80 – 400

= -320

Cost Performance Indicator (CPI) is an index that reveals the efficiency in resource utilization on the project (Bible, Bivins & Susan, 2011).  The CPI is the value of dividing the Earned Value (EV) with the Actual Cost (AC)

CPI (Activity d) = EV / AC

= 80 / 400

= 0.2

CPI (Activity e) = EV / AC

= 40 / 200

= 0.2

The Scheduled Performance Indicator (SPI) is an index that is used to show the efficiency of the time utilized of the project (Sanchez, & Robert, 2010).  It is a result of dividing Earned Value with the Planned Value

SPI (Activity d) = EV / PV

= 80 / 600

= 0.13

SPI (Activity e) = EV / PV

= 40 / 400

= 0.1

Estimate to Complete (ETC) refers to the estimated cost required to complete the remainder of the project (Sanchez, & Robert, 2010).  ETC = Budget at Completion (BAC) – Actual costs to date (AC)

Activity d= 600 / 400 = 1.5

Activity e= 400 / 200 = 2.0

Estimate at Completion (EAC) refers to the present day estimate of the total cost of the project.  It is arrived at by getting the difference between the approved budget for the whole task and the cost variance of the work done to date (Sanchez, & Robert, 2010)

Activity d = Budget at completion (BAC) + Actual Cost (AC) – Earned Value (EV)

= 600 + 400 – 80

= 920

Activity e = Budget at completion (BAC) + Actual Cost (AC) – Earned Value (EV)

= 400 + 200 – 40

= 560

The project is experiencing very poor performance.  For starters, the projects is running over budget and behind schedule.  This makes the project more expensive in the long run.  In addition to having the project over budget and behind schedule, the project has not gained the expected value thus the value of project thus far is below the expectations.

The stakeholders need to know the current state of the project.  They need to internalize their exposure to project risk.  Additionally, the stakeholders need to know the value of their investment so that they can judge whether the management is generating the best value for their investment and if they are using the available scarce resources efficiently (Eden, Ackermann & Williams, 2005).  To the stakeholders the information accessible to them assists them make informed decision about the organization.

References

Bible, Michael J., Bivins, Susan S. (2011). Mastering Project Portfolio Management: A Systems    Approach to Achieving Strategic Objectives. Fort Lauderdale, Florida. J Ross Publishing, Inc.

Eden, C., Ackermann, F. and Williams, T. (2005) The amoebic growth of project costs. Project     Management Journal, Vol. 36, No. 2, pp.15–27.

Sanchez, H., & Robert, B. (2010). Measuring portfolio strategic performance using key     performance indicators. Project Management Journal, Vol. 41 No. 5, 64-73   https://doi.org/10.1002/pmj.20165

We can write this or a similar paper for you! Simply fill the order form!

Project Risk and Quality Management Strategy

Project Risk and Quality Management Strategy
Project Risk and Quality Management Strategy

Project Risk and Quality Management Strategy

Order Instructions:

Project Risk and Quality Management Strategy, Managing Rick and Quality in the face of change.
Review the St. Dismas Assisted Living Facility Casa study on pages 111 and 112 of the Mental text.
Develop a risk strategy for your project. In addition to listing your, describe your process for identifying, analyzing, and managing your risks. Than prepare a quality management strategy. Your project risk management strategy must be at least one page, double spaced and include:

  • A brief statement on how you plan to manage quality for your project,
  • A brief statement on how you plan to manage project change,
  • A brief description of at least two tools and /or techniques you plan to use to manage quality and why you chose those tools.
  • Reference: A Guide to project management body of knowledge (PMBOK GUIDE) 4th edition.
    APA Styles.

 

SAMPLE ANSWER

Project Risk and Quality Management Strategy

Projects are vulnerable to certain risks and therefore it become important to ensure that an appropriate strategy is in place to mitigate such risks to ensure that the project comes to its completion within the expected period and meets the objectives set. The author develops a risk strategy for St. Dismas Assisted Living Facility Casa study.  The author as well describes the process of identifying, analyzing and managing the risks, and provides a quality Management strategy

St. Dismas Assisted Living Facility Casa study is experiencing a slowly decline of patient admission. This problem puts at risk the capability of the organization to accrue profits.  The solution is to expand the facility by including an assisted living facility to ensure delivery of cost effective inpatient care.  To ensure that this project is success, it is vital to carry out a risk assessment. The strategies adapted should ensure that the project risks are mitigated.

Risk management is a systematic process where manager identify, analyze and respond to project risks. This process includes maximization of the probability and consequences of positive events and at the same time minimizes any probability of negative or adverse events or consequences. In this project, the risk strategy that will ensure that problem is mitigated will entail the following:

The first thing is to come up with a good plan on overcoming the risks in undertaking the project. In this planning, it will require various inputs such as reviewing the project charter,   organization risk management policies (Thamhain, 2013).  Roles, responsibilities, and authority for decision-making are going to be defined to ensure that every party understands their roles (Project Management Institute, 2000). It is also important to come up with a template from the organization risk management plan, identify any stakeholders’ risks tolerance and work breakdown structures.  At this stage, it will require a meeting to be held to come up with a risk management plan. People that will be in attendant will include, project team, leaders, project manager and any person in the entity with the responsibility to manage the risk planning and execution activities and the stakeholders (Project Management Institute, 2000). Furthermore, at the planning stage,  issues pertaining to budgets estimates, time frames and tracking  are highlighted and discussed to ensure that  once the  proves commences it can move son smoothly.

After risk management planning, the second step required is risk identification. This will allow me to determine the specific risks likely to affect the project. The risks will be identified and its characteristics documented. To identify risk, it requires the person in charge to be aware of the mission, scope and objectives of the owners and stakeholders as well as of the project. It is also important to review the output of other processes to identify any risks across the entire project (Liu, Zou & Gong, 2013). Therefore, this will require review of some of the documents such as product description resource planning, WBS, schedules and costs estimates among many others.  Categories of risks that are likely to be identified include, technological based risks, project management risks such as poor time and resources allocation and inequality of project plan. Other categories are organizational risks and external risks such as labor issues, legal or regulatory environment issues among many others. Review of historical information such as project files and published information will also help to understand the project and identify any risk that the project may be facing.

Various techniques can be used to gather information about the project including, brainstorming, using Delphi technique, use of SWOT analysis and through interviews.

What follows is the analysis of the project risk.  One of the ways to analyze these risks is to carry out a qualitative risks analysis to assess the likelihood and impact of identified risk. Risks are prioritized in accordance to their potentials effects on the objectives of the project (Project Management Institute, 2000). It as well helps to understand importance of addressing specific risks and guides in risk responses. In analysis of these risks,  the criteria  used is the risk probability and impact in qualitative terms such as high, moderates and low or very low. In case the probability of risks occurring is high, then this provides a warning that triggers adherence to an alternative strategy to mitigate the same. Another way to analyze the risk is quantitative risk analysis that aims to analyze the risks numerically to find out probability of each risk and its consequences occurring on the project objectives (Benţa, Podean & Mircean, 2011). This analysis helps to determine or enhances achievement of a specific project objective. Identification and measurement of risks is done in relation to the relative contribution they have on the project risk.

The next step is risk response planning whereby options are developed to help determine actions that enhance opportunities and reduce threats to the project objectives or aims (Project Management Institute, 2000). This process includes identification as well as assignment of responsibilities to parties or individuals, to take charge of particular agreed risk responses. This process is very critical as it ensures that identifies risks are well addressed.   If this process is effective, the chances of decreasing these risks for the projects are high and vice versa. The process should consider the severity of the risk, the time required costs to meet the challenge, be realistic within the context of the project and the parties involved.

Risk management is very important in project risk management strategy. This includes monitoring and control of the risk the project faces. This process keeps track of the identified risks, monitors schedule risks and as well helps in identification of new risks (Project Management Institute, 2000).  It as well ensures execution of risk plans and evaluation of effectiveness of these plans to reduce the risk inherent. The project managers will be able to implement a contingency plan to mitigate these risks to allow successful project implementation. Risk monitoring and control is therefore a continuous process from the start to the end of the project. These risks continue to change as projects proceeds while anticipated risk may as well disappear.  Through risk monitoring and control, information is provided that allow making of effective decisions before the risk happens. During this process, it is important to ensure free flow of communication (Didraga, Bibu & Brandas, 2012). All stakeholders should assess the risks periodically and assess their magnitude as they come up with amicable decisions or solution to mitigate the risks. Monitoring and control serves many purpose. It ensures that risks responses follows planned plans in implementation, ensure validity of project assumptions, ensure that proper policies and procedures are followed and ensure that appropriate strategy is adhered to implement mitigation plan to counter the risks among many others.

Project quality management

Project quality management is a vital process and entails all processes that aims at ensuring that project satisfies the needs for what it was undertaken. This process entails all activities of the management function that helps in determining the quality policy, responsibilities, objectives that are implemented through quality planning, assurance and control, and improvement within quality system (Project Management Institute, 2000).

In implementing this project, quality management is important and it will involve three major phases. These will include quality planning, quality assurance and quality control. In quality planning, quality standards relevant to the project are going to be identified and a process determined on satisfying them. Quality assurance will entail evaluation of the overall project performance on regular basis to ensure that it satisfies them and meets relevant quality standard set. Quality control entails project monitoring to find out if it indeed compile with the appropriate quality standards as well identifies amicable ways to eliminate cause of unexpected performance. Therefore, this project will be managed by ensuring that it is reviewed on daily basis to comply with the expected threshold. Any deviations will be taken into consideration and corrected to ensure that the expected level of quality is upheld.

Management of project change is also important to ensure that the project succeeds. In this case, project change will be managed through scrutiny of the project to determine any changes.  Information on changes will be accessed through interviews, brainstorming and sharing with the project managers and the stakeholders. Communication is also very critical to ensure that in case of changes, they are communicated to the relevant stakeholders to enhance decision-making and to ensure the project moves on smoothly.

Various tools are used in management of quality. In this case, the two tools to use will include, benchmarking and benefits /cost analysis. Benching is appropriate because it provide a standard to measure performance of the project by comparing actual project practices with other projects to provide an overview on the areas requiring improvement.   Benefit/cost analysis is selected because it ensures that appropriate strategies are adopted to increase productivity at reduced costs and to increase stakeholder satisfaction.  It as well provides an assessment of benefits and cost of project hence appropriate in enhancing decision making.

References

Benţa, D.,  Podean, I., & Mircean, C. (2011). On Best Practices for Risk Management in   Complex Projects.  Informatica Economica, 15(2): 142-152.

Didraga, O.,  Bibu, N., & Brandas, C. (2012). Risk management approaches and practices in it     projects.  Annals of the University of Oradea, Economic Science Series, 21(1): 1014-  1020.

 Liu, J., Zou, P., & Gong, W. (2013). Managing Project Risk at the Enterprise Level: Exploratory Case Studies in China.  Journal of Construction Engineering & Management, 139(9): 1268-1274.

Project Management Institute. (2000). A Guide to project management body of knowledge (PMBOK , GUIDE) 4th edition. USA; Fur Camus Bolevard, newtown Square, PA.     Retrieved from: http://www.cs.bilkent.edu.tr/~cagatay/cs413/PMBOK.pdf

Thamhain, H. (2013). Managing Risks in Complex Projects.   Project Management Journal, 44(2): 20-35.

We can write this or a similar paper for you! Simply fill the order form!

Project Management Assignment Help Available

Project Management
Project Management

Project Management Assignment

Order Instructions:

Project Management
Your job at Shosheam Logistics located in Denver, Colorado requires you (and family) to move to
Thailand in 6-months time.

Part 1 – Project Scheduling
Using MS Project develop a Gantt chart with the activities necessary to accomplish the move project
and order the activities in a precedence (logical sequential) manner.
Explain and describe (in writing) the number of tasks/activities you have outlined and the order in
which you have placed the tasks/activities for project completion.
If you don’t have access to MS Project, you will need to develop the pieces MS Project does automatically, independently as separate documents in MS Excel.
Using MS Excel, create a Gantt chart by entering the project dates and events into a table

Next create a bar chart depicting the events based on the Gantt chart that you created.

For assistance on creating a Gantt chart in excel visit the MS office help files online and search:
“Creating a Gant chart in MS Excel.” You may also visit: http://office.microsoft.com/en-us/excel-help/create-a-gantt-chart-in-excel-HA001034605.aspx

Part 2 – Monitor, Organize, Analyze
Develop an estimation chart showing each activity, the preceding activity required, and associated
costs, with a 3 months, 4.5 months, and 6 months scenario.

Compare the costs of crashing the project from a 6-month timeline into a 4.5-month timeline:
a. Explain and defend (in writing) the pros/cons of crashing the project schedule.
b. What is the impact on personnel and resources to crashing the project?
c. What are the associated risks of crashing the project and how will you manage the risks?
If you don’t have access to MS Project, you will need to develop the pieces MS Project does automatically, independently as separate documents in MS Excel.
First create a table with the variables in MS Excel.
Next create a table that highlights the critical path.
Then create a table that highlights the critical path that you feel is the best candidate for crashing
and explain why you selected this path.

Part 3 – Project Control and Closeout
Explain and defend the processes and procedures you suggest for closing the project. Include the
handoffs, benefits, and lag required to begin operation at your new location.

Your assessment should be well structured. Make good use of bulleted lists, numbered lists, and
tables to further provide structure and clearly communicate information.
The Portfolio Project must be submitted in a single document of 7-10 pages in length, not including
the title and reference pages. The three parts, above, must be included with a detailed explanation of
each required component.
In your submission include at least five outside supportive references, not including the course
textbook, course materials, or other information resources provided as part of the course materials.
These must be cited and integrated into your paper. These are expected to provide information and
support for assertions made in your writing. The CSU-Global Library is a good place to find these
references.

SAMPLE ANSWER

Introduction

Project management helps in the planning, designing, and facilitating effective organizing, executing, controlling and monitoring of projects. A variety of software are at disposal of any person interested in project management (Project Management Institute, 2003), but in this project Microsoft Excel was used to create the Gantt chart shown below.

Part 1 – Project Scheduling

A table summarizing all the activities to be involved in the relocation project management

Project Name: Protocol Project
Company Name: Shosheam Logistics
Date of Report: 1/2/2015
Task Start Date End Date Days Completed Days Remaining
House hunting Task A 08/01/2014 30/12/2014 87 65
Vaccinations Task B 16/10/2014 26/11/2014 10 30
Applying for visas Task C 21/10/2014 20/11/2014 5 25
Paying for tickets Task D 26/10/2014 26/11/2014 0 30
Packaging Task E 10/09/2014 25/12/2014 20 60
Relocation of items Task F 16/10/2014 26/11/2014 10 30
Cancel apartment DD Task G 24/10/2014 29/10/2014 2 3
Cancel banking’s order Task H 24/10/2014 29/10/2014 2 3
New leasing contract Task I 02/01/2015 1/2/2015 0 3
Send out new address Task J 08/01/2015 1/8/2015 0 5
Forwarding request Task K 08/01/2015 1/8/2015 0 7
Relocation Task L 21/12/2014 25/12/2014 0 5
Registration office Task M 07/12/2014 12/8/2014 0 5
Furnish the new flat Task N 25/01/2015 1/29/2015 0 5
Reregister car Task O 21/01/2015 1/23/2015 0 2
Open an account Task P 28/12/2014 30/12/2014 0 5
Move bank account Task Q 26/01/2015 1/29/2015 0 3
Relocation completed Task R 29/01/2015 1/30/2015 0 1

 

The Gantt chart

 

In order to make sure that the relocation from Denver to Thailand is accomplished a total of 18 activities will required to be addressed ranging from the activities that will be conducted at Denver as well as the activities that will be conducted at Thailand which is the destination. The table shown above lists all the activities in a chronological order whereby each activity will be done after the preceding one has been completed or they can be done concurrently, but the preceding one must have began earlier than the subsequent activity or both should have began at the same time. This is very essential because most of the activities involved in project management are highly dependent on their preceding activities which act as the prerequisites for the successful execution of the subsequent and/or current activities while the current or present activities are very vital in project management because they act as prerequisites of the future activities in the same project.

For instance, the relocation project to be successfully completed all the activities which are listed in the above table must be carried out and are discussed below:

  • House hunting: This involves using either real estate agents or online renting/leasing agents in order to secure an appropriate house in a timely manner prior to relocation.
  • Vaccinations: This will involve getting vaccines for the family members as well as the pets which the family may belong as per immigration requirements at Thailand.
  • Applying for visa: This is a requirement especially the expatriates who have to work in foreign countries and it must be done early enough to avoid travel hitches when the deadline approaches.
  • Paying for the tickets: After the visas have been issued, the family needs to pay for their air tickets in advance in order to take advantage of any available travel allowances as well as avoiding to lack a flight in case they are all booked on their planned travelling day.
  • Packaging: The packaging of the family’s belongings needs to be done in advance in order to avoid rushing at the last minute which may be a big inconvenience.
  • Relocation of items: The durable items which can be relocated in advance such as the car, utensils, furniture and some clothes can be relocated before the actual relocation of the family.
  • Cancellation of the apartment address: The old address needs to be cancelled to avoid inconvenience to people using it as well as missing of correspondences send using the old address after relocation.
  • Cancellation of the banking’s order: The banking order in Denver needs to be cancelled when the relocation data draws nearer.
  • Signing new leasing contract: After the appropriate house has been identified a new leasing contract needs to be signed prior to relocation. This will also involve connecting the utilities such as internet, phone, electricity and water as well as getting details on where they should be paid.
  • Sending out the new address: The family needs to send out the newly acquired contact address to the bank; company; extended family; and friends.
  • Forwarding request: This involves forwarding of the relocation request to the destination country which in this case is Thailand.
  • Relocation: This involves the actual relocation of the family from Denver to Thailand.
  • Registration office: This will involve registering with the Thailand immigration office as an expatriate to be working in the country.
  • Furnish the new house: The lease house will require some refurnishing into the family’s desire and taste.
  • Reregister the car: The family car which had been relocated with other belongings will need to be reregistered by the Thailand authorities and insurance companies.
  • Open an account: A new account needs to be open for local transactions Thailand.
  • Move bank account: The bank account that was been used in Denver needs to be moved for continued use by the company.

Relocation completed: After all the above discussed activities have been completed, then the process of family relocation shall have been completed.

The bar chart created depicting the events in the Gantt chart

Part 2 – Monitor, Organize, Analyze

An estimation chart for three scenarios

6-Months Scenario 4.5-Months Scenario 3-Months Scenario
Task Preceding Task Estimates Cost Task Preceding Task Estimates Cost Task Preceding Task Estimates Cost
Task A $2,000 Task A $3,000 Task E $5,000
Task B A $200 Task E A $300 Task F E $500
Task C B $1,000 Task B E $1,000 Task A F $1,000
Task D C $5,000 Task C B $6,000 Task C A $7,500
Task E D $100 Task F C $100 Task B C $100
Task F E $1,000 Task D F $2,000 Task D B $2,500
Task G F $0 Task I D $0 Task I D $0
Task H G $0 Task K I $0 Task G I $0
Task I H $500 Task G K $1,000 Task H G $2,500
Task J I $500 Task H G $600 Task K H $800
Task K J $300 Task J H $300 Task J K $300
Task L K $3,000 Task L J $3,500 Task N J $4,000
Task M L $500 Task N L $500 Task L N $500
Task N M $1,000 Task M N $1,500 Task M L $2,500
Task O N $500 Task Q M $500 Task P M $500
Task P O $100 Task P Q $100 Task Q P $100
Task Q P $200 Task O P $200 Task O Q $200
Task R Q $0 Task R O $0 Task R O $0
Totals $15,900 $20,600 $28,000

 

  1. The pros/cons of crashing the project schedule

The pros of crashing the project schedule is mainly because the project is usually completed within the shortest time possible which would be highly essential when the project is urgently needed. The other pros is that it allows faster negotiations to be carried out thereby making sure that negotiations involved in project designing, planning, execution and monitoring are maintained minimal (Project Management Institute, 2003).

The cons of crashing the project schedule are mainly because it usually exhausts the involved personnel because they usually work under strict deadlines. The crash of project schedule also leads to increased costs because their no sufficient time to negotiate for the prices of materials and personnel while at the same there is also insufficient time to take advantage of promotions (Pinto, 2012).

  1. The impact on personnel and resources to crashing the project

The crashing of the project schedule leads to exhaustion of the personnel because they mostly without enough time to rest. The resources are spend at a very high rate because there no time to wait and also it leads to increased costs of resources because their no sufficient time to negotiate for the prices (Pinto, 2012).

  1. Risks associated with crashing the project and their management

There various risks associated with crashing the project schedule and they include lack of necessary permits, for instance, there are some projects which cannot go on without the vital permits which sometimes could not be obtained when a project is delayed (Tague, 2004). However, this can be managed by talking to the appropriate authorities. The other risk is that it may result to poor quality projects because there is no sufficient time for consultations and deliberations, but this can be managed by hiring a specialist or consultant to manage the project since its initial stages e.g. movers or couriers (Pinto, 2012).

Critical Path Table

Critical Path Table
Task Preceding Task
Task A
Task E A
Task B E
Task C B
Task F C
Task D F
Task I D
Task K I
Task G K
Task H G
Task J H
Task L J
Task N L
Task M N
Task Q M
Task P Q
Task O P
Task R O

 

This critical path is definitely the best mainly because it produces the appropriate time to execute all the activities in the project as well as being relatively affordable even though not the cheapest. However, the other critical path which is cheaper than this one would definitely take longer thereby delaying the process of relocating and settling in the destination country (Woolf, 2012).

Part 3 – Project Control and Closeout    

There are several processes and procedures that can be suggested for the closure of this project because of their resulting handoffs, benefits and lag.

For instance, in this project it is essential to evaluate the whole process of relocation and determine whether the budgeted costs were adhered to as well as determine if the time that was allocated to the project was effectively adhered to, and in particular for each specific activity that was involved in the project (Milosevic, 2003). This would be an essential process and procedure to exactly know how the project execution was performed thereby allowing someone a chance for rating the performance (Woolf, 2012).

Furthermore, this would be very critical in determining the critical path to be used in future whenever such kind of project may arise again. For example, the family may need to relocate in future and these processes and procedures would be essential to succinctly pinpoint which critical path to adopt without any delays (Klastorin, 2003).

References

Klastorin, T. (2003). Project Management: Tools and Trade-offs, (3rd ed.). Hoboken, NJ: John Wiley & Sons Inc.

Milosevic, D. Z. (2003). Project Management Toolbox: Tools and Techniques for the Practicing Project Manager. Hoboken, NJ: John Wiley & Sons Inc.

O’Brien, J. J. & Plotnick, F. L. (2010). CPM in Construction Management, (7th ed.). New York, NY: McGraw Hill.

Pinto, J. K. (2012).  Project Management:  Achieving the Competitive Advantage, (3rd ed.). Upper Saddle River, NJ:  Prentice Hall.

Project Management Institute, (2003). A Guide to the Project Management Body of Knowledge, (3rd ed.). Project Management Institute.

Tague, N. R. (2004). The Quality Toolbox, (2nd ed.). New York, NW: ASQ Quality Press.

Woolf, M. B. (2012) CPM Mechanics: The Critical Path Method of Modeling Project Execution Strategy. London: ICS-Publications.

We can write this or a similar paper for you! Simply fill the order form!

Construction Project Scheduling DML VS LSM

Construction Project Scheduling DML VS LSM
Construction Project Scheduling DML VS LSM

Construction Project Scheduling DML VS LSM

Read chapter 11, pp 281-295, and chapter 12, pp 299-311 from Mubarak,S. (2015).textbook construction project scheduling and control (2nd ed.). Hoboken, NJ: John Wiley.

  • Explain the differences and similarities between Dynamic Minimum lag (DML) and Linear scheduling method (LSM).
  • In addition, give an example of a scenario where you would prefer one over the other and explain your rationale for selecting the same.

The dynamic minimum lag (DML) is a new logical relationship in critical path method (CPM) networks. It maintains a minimum lag between the successor and its predecessor during the entire duration of the two activities, thus not allowing the successor to get ahead of (or closer than the assigned lag with) the successor at any point.

We can write this or a similar paper for you! Simply fill the order form!

Sexual Health Project Management

Sexual Health Project Management
Sexual Health Project Management

Sexual Health Project Management

It is only a draft so if i can have a plan what the essay going to talk about to meet the learning outcomes and i will place the complete order with the same
writer later (action plan, smart objectives will be attached
In order to meet the learning outcomes of the assignment, you will need to:
• Provide a brief background and context to the project
• Present/discuss clear aims and objectives
• Provide a detailed outline of the project management stages (with reference to the relevant literature on project management)
• Incorporate discussion of relevant tools for the management and planning of the project, e.g. Gantt charts, stakeholder mapping
• Discuss other relevant management issues, e.g. communications, teams
• Discuss the evaluation and dissemination of results
• Include critical reflections and recommendations

We can write this or a similar paper for you! Simply fill the order form!